|Horizontal Blinds: Real Wood Blinds: Graber:|
|" Width " Height Need help measuring?|
|HOT HOT HOT PRICING ON THIS GRABER BLIND. COUPON NOT REQUIRED
The is an exceptional fully custom blind made by Graber - the second largest company in the industry. The thick 2" elliptical shaped slats provide a bold look reminiscent of Plantation Shutters. The PureGrain finish of the wood stains, exclusive to Graber, highlights the natural characteristics of the wood. It has color coordinated ladders and cords and matching real wood tassels. The SureClose headrail features the patented light blocking lip for tighter slat closure and the trapezoid bottom rail also enhances closure. Add the optional routeless feature for even greater privacy and light control.
Cord tilt is standard but you can substitute wand tilter for no addition charge. The tilter is on the left side and lift cords are on the right side but you may reverse the standard control placement at no additional charge. You may also elect to have all control cords on either side - check the appropriate boxes below.
The blind comes with the decorative 3 1/2" Legacy valance. The Signature valance is optional at no additional charge. The 3" Classic valance and 3 1/8" Beaded valance are also available at no additional charge. The 4 1/2" Symphony Valance is available with a small surcharge (to see images of the valances click on the red question mark on the valance options below).
Add a personal touch by adding the optional color tape. (Color tape is not available with the routeless option).
The motorization feature, called Automate, is available. Automate allows for easier operation of the blind which is great for high windows, hard to reach windows and windows above sinks and bathtubs. Automate is a really nice feature for the elderly or physically impaired. It tilts the slats with a simple push of a button. (Does not raise or lower the blind). Four AA Lithium batteries are included batteries and will last about 3 years under normal operation. (The motor can not be used with hold down brackets and the tilter must be located on the side only). Please contact us for more information about this feature.
Head Rail Dimensions - Height is 1 5/8" x depth is 2".
Valances wider than 96" inside mount and 94" outside mount will be two or more sections spliced together
Standard Return Length for valance for outside mount blind - 3 9/16" (return length is from inside miter to wall - if ordering special return length for partial recess subtract actual window recess from return length. Minimum return length is")
Minimum Width 9" outside mount; 9 1/2" inside mount
(blinds less than 12" wide will have center tilt only and no lift mechanism
Maximum Width 96"
Minimum Height 10"
Maximum Height 120"
Minimum Depth required for inside mount - 1"
Minimum Depth required for inside flush mount w/valance - 4"
Production time for this blind is 5 to 7 days. Please allow 2 to 5 days for shipping.