(**) Cost Cutter Custom Spring Roller Shade with Splendor Light Filtering Polyester Fabric

no category: no subcategory:

(**) Cost Cutter Custom Spring Roller Shade with Splendor Light Filtering Polyester Fabric

cost cutter, inexpensive, prestige custom roller shade, cheap, spring roller, splendor polyester Light Filtering, fabric

Product At A Glance
Slat Size	NA
Material	Polyester Fabric
Production Time	5 - 7 Business Days
Install Instructions	Roller

Description

This shade is perfect when the decorating budget is limited. Safe for children and pets this shade has no cords or controls. It has a spring roller. To operate the shade simply jostle the hem bar.

This shade has Splendor light filtering fabric. The fabric is 100% polyester and it's 74" wide. Splendor shades wider than 74” will be rail - roaded and some sizes may require a seam.

Translucency is rated 3 – privacy and moderate to good light reduction. It can be cleaned with a light vacuum or damp cloth with mild soap (should not rub). The large selection of vibrant colors makes decorating a snap. The colors below are white to the street side.

For a more finished custom look include a decorative hem. (See the options box below and click on the red question mark to see a photo of the hem).

Depending on the size of the shade and the weight of the fabric the steel roller tube is 1 1/8" or 1 3/8" in diameter.

If ordering this shade for a door please note that hold down brackets are not available. Velcro can be used.

IMPORTANT: Concerning roller shades the width that you order is called the “tip to tip” measurement. The tip to tip measurement is the measurement from bracket to bracket after all the hardware has been placed on the roller tube. The fabric cannot be and will not be as wide as the “tip to tip” measurement. On all roller shades that have a clutch the fabric will be approximately 1 1/8” to 1 ¼” less wide than the “tip to tip” measurement. (Example: if the ordered width of the shade is 36 1/4” the fabric will be approximately 35” wide). This is true for all roller shades that are equipped with a clutch. So, roller shades, when installed as inside mount, will have small light gaps on each side of the shade. This is necessary to accommodate the side-mounted brackets and other hardware. This is a characteristic of all roller shades regardless of the manufacturer. All roller shades that utilize a clutch will have a light gap of approximately ¾” on one side and a ½” light gap on the other side. On spring roller shades such as our Cost Cutter shade there will be a light gap of approximately 5/8” on both sides. (When measuring the windows do not make any reductions – use exact measurements. The factory will make the necessary reductions. (See instructions for measuring windows).

Specifications:

• Min IB Mounting Depth: 3/4"
• IB Flush Mount: Approximately 2 1/4" for 1 1/8" tube or 2 1/2" for 1 3/8" tube
• OB Minimum Flat Vertical Surface: 3/4"

Production time for this product is 5 to 7 business days. Please allow 2 to 5 business days for shipping.

Standard Features

• Painted Metal Spring Roller Tube
• Wood Hem Bar

• Splendor Light Filtering 100% Polyester Fabric

Select Options